Gyratory crusher can also be called vertical gyratory crusher, whose working principle is similar to that of cone crusher. As a professional gyratory crusher manufacturer in China, Henan Fote Heavy Machinery Co., Ltd. will introduces the attention matters about the gyratory cone crusher procedure:
1. The personnel at feeding port for handling block stone or exceeding size stone must have security protection measures, preventing people from falling into crushing chamber to get accident.
2. When gyratory cone crusher take automobile to feed materials, it should set up the safety bank for car's back up at the feeding side of feeding port to prevent the car fall into the material pit. The other sides should furnish security fence to prevent people fall into the pit.
3. The hydraulic oil pressure of hydraulic gyratory crusher should comply with the requirement of user manual. When the pressure is too high or too low it explains that the inner of machine exists; some problems. It must stop the machine and check the fault.The hydraulic oil should be removed moisture regularly and kept clean. When find that the oil leak or inhaled air, it should be fixed timely.
4. Start the thin oil lubrication station and when it is normally operating, then it is allowed to start up the main engine.Only when the main engine and dynamic cone stood still, then is it allowed to stop the lubrication station.When Crusher works, the temperature of return oil in ubrication station should not be more than 60℃.
5. When crushing cone and beams are hoisted together, it must use the wire rope that meets the requirements to tie to the two veins of beams for hoisting on.It is strictly prohibited to use the eye bolt which is used for hoisting dynamic cone for hoisting the machine.When use every eye bolt in winter, it should preheat it to 10 ~ 15℃ prior to use.
6. When the crusher machine is working it is not allowed to open the manhole on the base to observe the laying-off situation of material. When remove or install the large component such as eccentric bushing, dynamic cone, beams etc., people is forbidden to stand in the inner of gyratory crusher. Gyrator crusher for sale is strictly prohibited to put on the seal cartridge of engine base.
If you are interested in gyratory crusher price, welcome to consult Fote Machinery: info@sinoftm.com.
gyratory crusher: Gyratory Crusher - Fote Machinery
1. The personnel at feeding port for handling block stone or exceeding size stone must have security protection measures, preventing people from falling into crushing chamber to get accident.
2. When gyratory cone crusher take automobile to feed materials, it should set up the safety bank for car's back up at the feeding side of feeding port to prevent the car fall into the material pit. The other sides should furnish security fence to prevent people fall into the pit.
3. The hydraulic oil pressure of hydraulic gyratory crusher should comply with the requirement of user manual. When the pressure is too high or too low it explains that the inner of machine exists; some problems. It must stop the machine and check the fault.The hydraulic oil should be removed moisture regularly and kept clean. When find that the oil leak or inhaled air, it should be fixed timely.
4. Start the thin oil lubrication station and when it is normally operating, then it is allowed to start up the main engine.Only when the main engine and dynamic cone stood still, then is it allowed to stop the lubrication station.When Crusher works, the temperature of return oil in ubrication station should not be more than 60℃.
5. When crushing cone and beams are hoisted together, it must use the wire rope that meets the requirements to tie to the two veins of beams for hoisting on.It is strictly prohibited to use the eye bolt which is used for hoisting dynamic cone for hoisting the machine.When use every eye bolt in winter, it should preheat it to 10 ~ 15℃ prior to use.
6. When the crusher machine is working it is not allowed to open the manhole on the base to observe the laying-off situation of material. When remove or install the large component such as eccentric bushing, dynamic cone, beams etc., people is forbidden to stand in the inner of gyratory crusher. Gyrator crusher for sale is strictly prohibited to put on the seal cartridge of engine base.
If you are interested in gyratory crusher price, welcome to consult Fote Machinery: info@sinoftm.com.
gyratory crusher: Gyratory Crusher - Fote Machinery