bamoelectronics
New Member
ROBOT Mobile Remote Switch or Mobile Pump Controller
• Mobile Remote Switch is a device to switch ON distant electric motors or agriculture pump sets
through mobile for desired duration.
• This Mobile Remote Switch will be mounted near to pump starter (all types with push button) and
connected as per the wiring diagram given.
• Mobile Remote Switch will have one SIM card of service provider having maximum signal strength.
• Suppose you want to run your pump set for 5 hours, just dial the number of Mobile Switch from
your mobile or land line and when it is hooked up simply press *05 (Star, zero and five)
• Your pump will start and run for 5 hours and then stops.
• Suppose power fails after 30 min of running, it will start automatically once power resumes.
• Further it will complete remaining running hours of 4 and half hours.
• In case suppose in between it is required to switch OFF the pump.
• Dial the no. and press #
• Pump will STOP
• Meanwhile if you want to confirm pump running status, dial Mobile Switch no. and press 0
• Beeps will be heard over your mobile.
• Mobile Switch is user friendly, no need to keep constant watch over of running of pump.
• The best feature of mobile switch is that once desired time duration is loaded, pump is going to run
for this desired duration considering frequent power failure.
Visit our website:
Pump Controller - Timer and Wireless Product Manufacturer and Exporter | Bamo Electronics, Pune
Bamo Electronics - Home
• Mobile Remote Switch is a device to switch ON distant electric motors or agriculture pump sets
through mobile for desired duration.
• This Mobile Remote Switch will be mounted near to pump starter (all types with push button) and
connected as per the wiring diagram given.
• Mobile Remote Switch will have one SIM card of service provider having maximum signal strength.
• Suppose you want to run your pump set for 5 hours, just dial the number of Mobile Switch from
your mobile or land line and when it is hooked up simply press *05 (Star, zero and five)
• Your pump will start and run for 5 hours and then stops.
• Suppose power fails after 30 min of running, it will start automatically once power resumes.
• Further it will complete remaining running hours of 4 and half hours.
• In case suppose in between it is required to switch OFF the pump.
• Dial the no. and press #
• Pump will STOP
• Meanwhile if you want to confirm pump running status, dial Mobile Switch no. and press 0
• Beeps will be heard over your mobile.
• Mobile Switch is user friendly, no need to keep constant watch over of running of pump.
• The best feature of mobile switch is that once desired time duration is loaded, pump is going to run
for this desired duration considering frequent power failure.
Visit our website:
Pump Controller - Timer and Wireless Product Manufacturer and Exporter | Bamo Electronics, Pune
Bamo Electronics - Home
Last edited: