How to make CORN THRESHING MACHINE have best operation effect?
First, put the four feet of the Corn Threshing Machine on flat foot pads.
Second, feed it corn cobs continuously and evenly. The feeding quantity should be proper. Interrupted feeding may affect its productivity and too large feeding quantity may cause machine blocking or even damage the motor.
Third, check whether the power line link is fixed and install the ground electrode.
Fourth, before the Corn Threshing Machine work finishing, discharge all of the corn cobs and then make the machine halt with no-load.
Fifth, the corn cobs moisture rate should not be higher than 20%, or it also affects the operation effect.
Besides, There are six attentions in large Corn Threshing Machine operation.
First, check the large Corn Threshing Machine before operation. Check whether the rasp bar is in good condition, the bolts are loose, the transmission parts have problems and find out the unsafe factors to eliminate them.
Second, don’t make the large Corn Threshing Machine have overload work, no matter it uses electric motor or diesel engine.
Third, the safety device should be complete. For example, there should have protective cover at each chain part to avoid hurting. The electric motor should have ground lead. The diesel exhausting pipe should have fire fighting cover to avoid fire hazard.
Fourth, corn feeding should be even.
Fifth, the continuous working time should not be too long. For example, when the machine works for 5-6 hours, we should shut it down and make it rest for a while.
Sixth, your Corn Threshing Machine should not be home-made or obsolete. Home-made Corn Threshing Machine or obsolete thresher always has low safety performance compared with the thresher after tightened inspection.
Corn Thresher
ugoodmach@gmail.com
First, put the four feet of the Corn Threshing Machine on flat foot pads.
Second, feed it corn cobs continuously and evenly. The feeding quantity should be proper. Interrupted feeding may affect its productivity and too large feeding quantity may cause machine blocking or even damage the motor.
Third, check whether the power line link is fixed and install the ground electrode.
Fourth, before the Corn Threshing Machine work finishing, discharge all of the corn cobs and then make the machine halt with no-load.
Fifth, the corn cobs moisture rate should not be higher than 20%, or it also affects the operation effect.
Besides, There are six attentions in large Corn Threshing Machine operation.
First, check the large Corn Threshing Machine before operation. Check whether the rasp bar is in good condition, the bolts are loose, the transmission parts have problems and find out the unsafe factors to eliminate them.
Second, don’t make the large Corn Threshing Machine have overload work, no matter it uses electric motor or diesel engine.
Third, the safety device should be complete. For example, there should have protective cover at each chain part to avoid hurting. The electric motor should have ground lead. The diesel exhausting pipe should have fire fighting cover to avoid fire hazard.
Fourth, corn feeding should be even.
Fifth, the continuous working time should not be too long. For example, when the machine works for 5-6 hours, we should shut it down and make it rest for a while.
Sixth, your Corn Threshing Machine should not be home-made or obsolete. Home-made Corn Threshing Machine or obsolete thresher always has low safety performance compared with the thresher after tightened inspection.
Corn Thresher
ugoodmach@gmail.com