Small scale flour milling machine is high efficiency, easy operation. The correct operation will not only prolong the life of the machine, but also save money when it comes into use. Below are some notes of using small flour milling plant:
1. Check whether there is foreign body inside the crushing chamber ,it must be empty before starting, then switch on the power.
2. Start the motor, run the small scale flour milling equipment for 1 to 2 minutes, then slowly feed, do not be too much or too fast.
3. The small flour milling plant adopts overheat protector, if the motor overload, it will automatically stop. Press the overheat protector to restart operation.
4. In the process of work, electric current should not be greater than 15 amperes.
http://www.flourmillmachine.org/
1. Check whether there is foreign body inside the crushing chamber ,it must be empty before starting, then switch on the power.
2. Start the motor, run the small scale flour milling equipment for 1 to 2 minutes, then slowly feed, do not be too much or too fast.
3. The small flour milling plant adopts overheat protector, if the motor overload, it will automatically stop. Press the overheat protector to restart operation.
4. In the process of work, electric current should not be greater than 15 amperes.
http://www.flourmillmachine.org/