Wood Crusher Introduction
Wood crusher, also known as wood chipper, is specialized equipment for wood logs processing industry. This crusher equipment integrates the chipping and crushing process and is suitable for cutting 1-20 cm of branches, stems and fiber stem material like bamboo, straw, corn stalks, sorghum stalk stalk fiber materials, etc. into powder of less than 3-5mm, which is right size before pelletizing. It is widely used for machine-made charcoal plant, particle board plant, artificial board factory, bio-energy power plant, paper mill, sawdust plant, fungi planting industry, landscape greening , chemical industry, etc.
Requirement on Raw Materials and Crushing Process
The wood logs, square blocks, wood staff, etc. to be crushed had better to be with the diameter less than 200mm and the moisture content below 30%. For those wood material whose diameter is less than 50mm, wood hammer mill is better choice. In the crushing process, the rotor rotates with the same direction of cutting blade, producing high speed airflow. The materials accelerate and impacted with the high speed airflow, thus completing the crushing process. After crushed, the output is with diameter 3-5mm for further processing.
Wood crusher, also known as wood chipper, is specialized equipment for wood logs processing industry. This crusher equipment integrates the chipping and crushing process and is suitable for cutting 1-20 cm of branches, stems and fiber stem material like bamboo, straw, corn stalks, sorghum stalk stalk fiber materials, etc. into powder of less than 3-5mm, which is right size before pelletizing. It is widely used for machine-made charcoal plant, particle board plant, artificial board factory, bio-energy power plant, paper mill, sawdust plant, fungi planting industry, landscape greening , chemical industry, etc.
Requirement on Raw Materials and Crushing Process
The wood logs, square blocks, wood staff, etc. to be crushed had better to be with the diameter less than 200mm and the moisture content below 30%. For those wood material whose diameter is less than 50mm, wood hammer mill is better choice. In the crushing process, the rotor rotates with the same direction of cutting blade, producing high speed airflow. The materials accelerate and impacted with the high speed airflow, thus completing the crushing process. After crushed, the output is with diameter 3-5mm for further processing.