reduce the failure rate of sand making machine is now widely used in various industries, particularly in the construction industry, increase in the use of sand making machine is becoming more prevalent. We all know that sand belonged to stronger overall than equipment, with high efficiency of production capacity, improve production technology, success among the industry's top position.
When our Crusher operation, operators needed to master a good operation. Equipment in the course of work, inevitably this kind of problems, which affect the normal operation of the equipment.
Therefore, the users while they manipulate sand making machine
, with a little attention, you can avoid failure took place. Before starting the device, you should check that the door is in the closed position of the body, you need to open the warehouse doors on its maintenance, must be guaranteed to be in a State of sand making machine downtime and avoid dangerous will happen.
Secondly, we must make sure the sand making machine is under no load condition, equipment operation stable, can feed on it for production. Feed particle size in accordance with the requirements set out in item, oversize material entering the crushing Chamber, can damage the crushing cavity, and may even affect the service life of crushers. When the process of sand making machine at work, if any anomalies are found, should immediately stop its inspections, after troubleshooting, you can produce it. Equipment operating procedures, upgrading equipment in work efficiency, reduce the chances of failure rate.
When our Crusher operation, operators needed to master a good operation. Equipment in the course of work, inevitably this kind of problems, which affect the normal operation of the equipment.
Therefore, the users while they manipulate sand making machine
, with a little attention, you can avoid failure took place. Before starting the device, you should check that the door is in the closed position of the body, you need to open the warehouse doors on its maintenance, must be guaranteed to be in a State of sand making machine downtime and avoid dangerous will happen.
Secondly, we must make sure the sand making machine is under no load condition, equipment operation stable, can feed on it for production. Feed particle size in accordance with the requirements set out in item, oversize material entering the crushing Chamber, can damage the crushing cavity, and may even affect the service life of crushers. When the process of sand making machine at work, if any anomalies are found, should immediately stop its inspections, after troubleshooting, you can produce it. Equipment operating procedures, upgrading equipment in work efficiency, reduce the chances of failure rate.