Sand is the life of the equipment by themselves to decide, do routine maintenance of products, extend the life of nature. Hony sand making machine as a leading manufacturer of sand production line launched in the market, there are no small response, the production of Sand sandy uniform particle size, high compressive strength than natural sand, manufactured
sand making machine hammer to break even meet the high standards of construction sand requirements. Customers in the use of Sand, just blindly pursue efficient, blindly thinking about what to do to be able to increase productivity, greater economic efficiency, but forget a very important point, and that is for sand making equipment routine maintenance. Hony mechanical technician for you to explain sand making machine routine maintenance matters need attention:
1, bearing shoulder the entire load of the machine, so good lubrication of the bearing life of a great relationship, it directly affects the life and the operation rate of the machine, which requires the injection of oil must be clean, seal must be good, Sand the main oiling Office
(1) Turn the bearing
(2) roller bearing
(3) All gear
(4) activities bearing, sliding plane.
2, the newly installed tires prone to loosening must always be checked.
3, note that the various parts of Sand is working properly.
4, pay attention to check the degree of wear of wear parts, pay attention to the replacement of worn parts.
5, put the event the device chassis plane should avoid activities out of dust and other materials bearing on the bottom shelf can not move the machine could not have broken the material, so as to cause a serious accident.
6, bearing temperature rise, the reasons should be eliminated immediately stopped and checked.
7, turn the gear in operation should be immediately stopped if the impact of the sound check and eliminate.
Sand maintenance is an extremely important regular work, it should work closely with the proper and timely maintenance and other operations, there should be full-time personnel on duty checks.
sand making machine hammer to break even meet the high standards of construction sand requirements. Customers in the use of Sand, just blindly pursue efficient, blindly thinking about what to do to be able to increase productivity, greater economic efficiency, but forget a very important point, and that is for sand making equipment routine maintenance. Hony mechanical technician for you to explain sand making machine routine maintenance matters need attention:
1, bearing shoulder the entire load of the machine, so good lubrication of the bearing life of a great relationship, it directly affects the life and the operation rate of the machine, which requires the injection of oil must be clean, seal must be good, Sand the main oiling Office
(1) Turn the bearing
(2) roller bearing
(3) All gear
(4) activities bearing, sliding plane.
2, the newly installed tires prone to loosening must always be checked.
3, note that the various parts of Sand is working properly.
4, pay attention to check the degree of wear of wear parts, pay attention to the replacement of worn parts.
5, put the event the device chassis plane should avoid activities out of dust and other materials bearing on the bottom shelf can not move the machine could not have broken the material, so as to cause a serious accident.
6, bearing temperature rise, the reasons should be eliminated immediately stopped and checked.
7, turn the gear in operation should be immediately stopped if the impact of the sound check and eliminate.
Sand maintenance is an extremely important regular work, it should work closely with the proper and timely maintenance and other operations, there should be full-time personnel on duty checks.