joanna yan
Senior Member
After every 50 hours working of the oil processing machine, we should check lubrication, gear box above the cup may not be short of oil, the source is connected squeezing screw shaft adjusting screw bearing should adjust the screw hole out butter filling a, is strictly prohibited dry grinding of the oil processing machine.
The lubrication parts should prevent the intrusion of dust and other impurities, every year to check the oil quality of the reduction box in the oil processing machine once, if the discovery of metamorphism, should replace all the oil of oil processing machine.
When the pressing quantity of oil processing machine is reduced, out of the cake or out of the oil is not normal, should be squeezed out of the screw shaft, check out the screw, press the bar, out of the cake head, out of the cake mouth wear, wear parts of oil processing machine should be replaced in time.
Every time after the end of the oil processing machine’s working, the oil processing machine should be cleared of residual, clean the dust on the surface of the grease machine.
After the end of the production season when long stored should be a maintenance and will be squeezed screw, squeezed, cake head washable reinstall oiling, we had better place the oil processing machine in a dry place.
Every time after the end of the oil processing, the spiral shaft solution cleaning residue, and with a dry cloth and cotton swab stick scrub and rotating the mouth, to prevent clogging of the oil processing machine.
More informations or need about the oil processing machine pls contact me freely, we also welcome your inquiry, and will reply you as soon as possible.
Professional Supplier Of Oil Mill Processing Equipment
wintone10@wintonemachinery.com
The lubrication parts should prevent the intrusion of dust and other impurities, every year to check the oil quality of the reduction box in the oil processing machine once, if the discovery of metamorphism, should replace all the oil of oil processing machine.
When the pressing quantity of oil processing machine is reduced, out of the cake or out of the oil is not normal, should be squeezed out of the screw shaft, check out the screw, press the bar, out of the cake head, out of the cake mouth wear, wear parts of oil processing machine should be replaced in time.
Every time after the end of the oil processing machine’s working, the oil processing machine should be cleared of residual, clean the dust on the surface of the grease machine.
After the end of the production season when long stored should be a maintenance and will be squeezed screw, squeezed, cake head washable reinstall oiling, we had better place the oil processing machine in a dry place.
Every time after the end of the oil processing, the spiral shaft solution cleaning residue, and with a dry cloth and cotton swab stick scrub and rotating the mouth, to prevent clogging of the oil processing machine.
More informations or need about the oil processing machine pls contact me freely, we also welcome your inquiry, and will reply you as soon as possible.
Professional Supplier Of Oil Mill Processing Equipment
wintone10@wintonemachinery.com