drsabariuma
New Member
Hello,
I am facing lot of challenges to pump water from my open well to top of hill ,where I constructed the tank . It is about 300 meters height ,12.5 hp submersible motor attached to 3 inch pipe then to 5 inch pipe each time it breaks due to return water then we fixed check value then now pressure problem we fixed pressure release value 2 inch however the problem is solved with 1 inch water releasing to well again so we need to pump all the water straight to tank .need solution and expert advice .
I am facing lot of challenges to pump water from my open well to top of hill ,where I constructed the tank . It is about 300 meters height ,12.5 hp submersible motor attached to 3 inch pipe then to 5 inch pipe each time it breaks due to return water then we fixed check value then now pressure problem we fixed pressure release value 2 inch however the problem is solved with 1 inch water releasing to well again so we need to pump all the water straight to tank .need solution and expert advice .