joanna yan
Senior Member
How much do you know about MAIZE MILLING MACHINE malfunction?
First, maize milling machine malfunction may happen to the spiral agitator:
1) The axle of the agitator does not turn caused by too much feeding or the driving belt slipping.
2) There has no maize discharging at the discharging port caused by the wrong motor diversion, port blocking or mixing arm breakage.
Second, maize milling machine malfunction may happen to the motor:
The whole machine has more than ten sets of motors. Motor malfunction cannot be ignored. Too high temperature is one of the main reason of motor damage. All of the following factors may cause too high temperature: fuel starvation of the bearing, dirt mixing in the bearing, bearing damage or motor overload.
Third, maize milling machine may happen to the air lock valve:
The common reasons that cause air lock valve malfunction: the air leak at the joint part, impeller wear, and so on. If it is caused by the impeller wear, we can add a rubber board at the outer edge.
see more information on www.flour-milling-machine.com
contact me through joannayan198712@gmail.com
First, maize milling machine malfunction may happen to the spiral agitator:
1) The axle of the agitator does not turn caused by too much feeding or the driving belt slipping.
2) There has no maize discharging at the discharging port caused by the wrong motor diversion, port blocking or mixing arm breakage.
Second, maize milling machine malfunction may happen to the motor:
The whole machine has more than ten sets of motors. Motor malfunction cannot be ignored. Too high temperature is one of the main reason of motor damage. All of the following factors may cause too high temperature: fuel starvation of the bearing, dirt mixing in the bearing, bearing damage or motor overload.
Third, maize milling machine may happen to the air lock valve:
The common reasons that cause air lock valve malfunction: the air leak at the joint part, impeller wear, and so on. If it is caused by the impeller wear, we can add a rubber board at the outer edge.
see more information on www.flour-milling-machine.com
contact me through joannayan198712@gmail.com