EDIBLE OIL REFINING PLANT moisture adjustment structural composition and dust removal:
The choice of dust removal equipment by ventilation for Edible Oil Refining Plant is quite important
C lean environment can ensure the operator health and production safety. To improve Edible Oil Refining Plant working efficiency, the air draft influence rate on the equipment production efficiency can reach 15-20% above. Therefore, ventilation dedusting equipment design should be complete and reasonable. Especially the cleaning sections should be reasonable. In air draft device installation of each section, we should do as the following points:
1) Sturdy and durable, easily demounted, simple operation and maintenance. To make the dust content of the workshop and the outside air reach the national standard, we usually adopt second grade of dedusting.
2) For the equipment that needs to absorb waste heat, waste wetness, and wind speed, the air draft device should have proper air inlet and reasonable air duct to ensure enough air volume.
3) Control the air speed of the dangerous fracture surface to avoid material inhaling For the particle material, the dangerous fracture surface air speed is 3-4m/s, and the powdery material air speed is 0.5-1m/s.
4) Try to get close and align to the movement direction of the dust source and dusty airflow. Under certain dust collection speed condition, it can remove the dust generated from the equipment furthest.
5) Sealing is the principal thing. Air draft is subsidiary. By this way, can we reduce and prevent dust spilling.
Edible Oil Refining Plant moisture adjustment structural composition
Edible Oil Refining Plant moisture adjustment provides the best technological processing conditions for corn peeling and degermination by corn kernels moisturing.
The feasible moisture for corn processing is 16-17%. When the corn moisture reaches 18% above, we can directly peel the corn and grind it into grits without moisture adjusting. When the corn moisture is 20% above, the peeling and degermination efficiency is higher and the end products moisture is also high.
From the above, we can see that suitable moisture adjustment can improve corn products quality. In fact, Edible Oil Refining Plant moisture adjustment mechanism is not complex. It mainly consists of the following three parts:
First, corn moisture detective equipment: this equipment can judge moisture content scientifically and then we can adjust the moisture.
Second, dampener can also improve corn moisture content
Edible Oil Refining Plant, Oil Refining Machine
The choice of dust removal equipment by ventilation for Edible Oil Refining Plant is quite important
C lean environment can ensure the operator health and production safety. To improve Edible Oil Refining Plant working efficiency, the air draft influence rate on the equipment production efficiency can reach 15-20% above. Therefore, ventilation dedusting equipment design should be complete and reasonable. Especially the cleaning sections should be reasonable. In air draft device installation of each section, we should do as the following points:
1) Sturdy and durable, easily demounted, simple operation and maintenance. To make the dust content of the workshop and the outside air reach the national standard, we usually adopt second grade of dedusting.
2) For the equipment that needs to absorb waste heat, waste wetness, and wind speed, the air draft device should have proper air inlet and reasonable air duct to ensure enough air volume.
3) Control the air speed of the dangerous fracture surface to avoid material inhaling For the particle material, the dangerous fracture surface air speed is 3-4m/s, and the powdery material air speed is 0.5-1m/s.
4) Try to get close and align to the movement direction of the dust source and dusty airflow. Under certain dust collection speed condition, it can remove the dust generated from the equipment furthest.
5) Sealing is the principal thing. Air draft is subsidiary. By this way, can we reduce and prevent dust spilling.
Edible Oil Refining Plant moisture adjustment structural composition
Edible Oil Refining Plant moisture adjustment provides the best technological processing conditions for corn peeling and degermination by corn kernels moisturing.
The feasible moisture for corn processing is 16-17%. When the corn moisture reaches 18% above, we can directly peel the corn and grind it into grits without moisture adjusting. When the corn moisture is 20% above, the peeling and degermination efficiency is higher and the end products moisture is also high.
From the above, we can see that suitable moisture adjustment can improve corn products quality. In fact, Edible Oil Refining Plant moisture adjustment mechanism is not complex. It mainly consists of the following three parts:
First, corn moisture detective equipment: this equipment can judge moisture content scientifically and then we can adjust the moisture.
Second, dampener can also improve corn moisture content
Edible Oil Refining Plant, Oil Refining Machine