You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Earth agar (digger)
- Thread starter mss_
- Start date
Hi
An earth auger is a tool that is used to dig holes in the earth, often for installing posts, fences and sometimes for soil research. Most earth augers are powerful machines that run on gas, fuel or electricity. To operate one, you must be familiar with the safety precautions and also the method of use.
VFor Fuel-Powered Machines, Ensure that the Tank is Filled
Before you begin running the tool, wear proper clothing that will cover your body. Long, flowing clothes, hair and jewelry can get in the way of the tool, so it is necessary to avoid them. Read the instruction manual and familiarize yourself with the directions therein. You must also wear safety goggles, ear protection, gloves and sturdy boots. Maintain a steady footing on a level surface. If you are operating a fuel-powered earth auger, ensure that the required amount of fuel is present in the tank. Some machines require a mixture of oil and gasoline. Mix the fuel away from the tool and fill the tank when it is turned off and has cooled down after operation.
Step 2 – Attach Auger to Powerhead
Check all the parts of the earth auger and the powerhead and rule out any broken parts or loose connections. Select the correct auger for the operation you intend to perform. Never use an earth auger for drilling ice or vice versa. To connect the auger to the powerhead, you must first keep the powerhead on a safe, steady surface. Align the auger to the drive shaft on the powerhead. Use pins or nails to attach the auger to the powerhead.
Step 3 – Select the Area
Read more: http://www.doityourself.com/stry/how-to-use-an-earth-auge
Regards
Ashwini
An earth auger is a tool that is used to dig holes in the earth, often for installing posts, fences and sometimes for soil research. Most earth augers are powerful machines that run on gas, fuel or electricity. To operate one, you must be familiar with the safety precautions and also the method of use.
VFor Fuel-Powered Machines, Ensure that the Tank is Filled
Before you begin running the tool, wear proper clothing that will cover your body. Long, flowing clothes, hair and jewelry can get in the way of the tool, so it is necessary to avoid them. Read the instruction manual and familiarize yourself with the directions therein. You must also wear safety goggles, ear protection, gloves and sturdy boots. Maintain a steady footing on a level surface. If you are operating a fuel-powered earth auger, ensure that the required amount of fuel is present in the tank. Some machines require a mixture of oil and gasoline. Mix the fuel away from the tool and fill the tank when it is turned off and has cooled down after operation.
Step 2 – Attach Auger to Powerhead
Check all the parts of the earth auger and the powerhead and rule out any broken parts or loose connections. Select the correct auger for the operation you intend to perform. Never use an earth auger for drilling ice or vice versa. To connect the auger to the powerhead, you must first keep the powerhead on a safe, steady surface. Align the auger to the drive shaft on the powerhead. Use pins or nails to attach the auger to the powerhead.
Step 3 – Select the Area
Read more: http://www.doityourself.com/stry/how-to-use-an-earth-auge
Regards
Ashwini
krushimitra11
Member
Very Useful Info by Senior member and Bulletin Board Moderator. Thanks a lot.
Can you suggest good makes and approx price range.
Also can you suggest suppliers of Earth Augers in Maharashtra ?
I have small land 2 Acre in Maharashtra.
Can you suggest good makes and approx price range.
Also can you suggest suppliers of Earth Augers in Maharashtra ?
I have small land 2 Acre in Maharashtra.
krushimitra11
Member
Can we get Hand Earth Diggers ? Can we also power it with Cycle like equipment with gear for more power ? Can you please advice ?
Last edited by a moderator: