Raw material mill is the key grinding equipment after the crushing process. Raw material mill is mainly used in grinding raw materials and final products in cement plant. It is also suitable for grinding various ores and other materials in the metallurgy, mine, chemical, construction and other industries. This equipment turns around the centre and feeds from the two ends, with the centre discharging material to lift circular mill.
The mill has the investment, the process is simple, easy operation and maintenance work at the end and so on. Milling system power consumption and vertical mill close. The feed material is loaded into the device from the feed mill, the hot air from the inlet tube into the mill, the mill with the rotation of the cylinder, grinding coal and the hot air heat-exchanged coal is crushed and ground in the mill, in while the coal is milled, the mill powder is hot air, and out through the mill outlet means. MF series of wind swept dried raw mill, a cement plant with raw mill dryer.
Raw mill is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is featured with stable and reliable working condition.
Inside the cylinder, new type of segregating lining boards and standard ladder-type lining board are adopted, which increases the grinding superficial area of the materials, improves the classification effect and makes the follow-up maintenance and change of the spare parts simpler. The new type of partition cabin structure adopts adjustable lifting board and fixed lifting board, which is easy to install and maintain.
If you are interested in other building material equipment, such as cement mill, rotating kiln, cooling machine, coal mill and so on, you can contact or visit Hongxing Machinery: sales@hxjq.com.
The mill has the investment, the process is simple, easy operation and maintenance work at the end and so on. Milling system power consumption and vertical mill close. The feed material is loaded into the device from the feed mill, the hot air from the inlet tube into the mill, the mill with the rotation of the cylinder, grinding coal and the hot air heat-exchanged coal is crushed and ground in the mill, in while the coal is milled, the mill powder is hot air, and out through the mill outlet means. MF series of wind swept dried raw mill, a cement plant with raw mill dryer.
Raw mill is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is featured with stable and reliable working condition.
Inside the cylinder, new type of segregating lining boards and standard ladder-type lining board are adopted, which increases the grinding superficial area of the materials, improves the classification effect and makes the follow-up maintenance and change of the spare parts simpler. The new type of partition cabin structure adopts adjustable lifting board and fixed lifting board, which is easy to install and maintain.
If you are interested in other building material equipment, such as cement mill, rotating kiln, cooling machine, coal mill and so on, you can contact or visit Hongxing Machinery: sales@hxjq.com.