Screw washing machine is a kind of highly-efficient sand washing equipment, combining the advanced techniques and the domestic physical conditions of sand industry. The sand washing machine has the advantages of high cleanliness, reasonable structure and high productivity. During the washing process, little sand runs off. The transmission part is separated from the water and the fault rate of the sand washing machine is further lower than the commonly used sand washing machine, making the best upgraded equipment in the sand washing machine.
Screw washing machine is mainly used for sand washing,classifying,dewatering and cleaning in the construction of high way and railway,hydroelectric projects and so on. The box of mineral sand washer is made up of the portal frame which supports the lifting part, shell and plate welded by channel steel. There is guide rail soldered by steel plates near the inner side of the portal frame which prevents the lifting axis box from swinging when lifting materials. To contain more water for sand washing equipment, the upper back of the box explodes open to both sides. There is an overflow tank on the upper side near the outside of the blind. The plate is determined by the length of the box and the installation of the dynamic part.
The rotor part of mineral sand washer is composed of the center shaft, the swallow tailed iron and the screw vanes. The center shaft has the longer half and the shorter half at the ends. The longer half is tightly fixed in the bearing. Hoops, on which the angle steel is soldered, are welded on the center shaft. The swallow tailed iron, the big screw vanes and the abrasion-resistant impellers fixed by the screws should be installed based on the instructions in the pictures. On the rotors of small type classifier, the impellers are generally fixed directly on the swallow tailed iron. The impellers are double lined and rank in order according to the screw distance determined by the technology.
Welcome to visit: sales@hxjq.com.
sand washing equipment: Sand Washer,Sand Washing Machine,Screw Washing Machine,Sand Washing Equipment - HXJQ Machinery
Screw washing machine is mainly used for sand washing,classifying,dewatering and cleaning in the construction of high way and railway,hydroelectric projects and so on. The box of mineral sand washer is made up of the portal frame which supports the lifting part, shell and plate welded by channel steel. There is guide rail soldered by steel plates near the inner side of the portal frame which prevents the lifting axis box from swinging when lifting materials. To contain more water for sand washing equipment, the upper back of the box explodes open to both sides. There is an overflow tank on the upper side near the outside of the blind. The plate is determined by the length of the box and the installation of the dynamic part.
The rotor part of mineral sand washer is composed of the center shaft, the swallow tailed iron and the screw vanes. The center shaft has the longer half and the shorter half at the ends. The longer half is tightly fixed in the bearing. Hoops, on which the angle steel is soldered, are welded on the center shaft. The swallow tailed iron, the big screw vanes and the abrasion-resistant impellers fixed by the screws should be installed based on the instructions in the pictures. On the rotors of small type classifier, the impellers are generally fixed directly on the swallow tailed iron. The impellers are double lined and rank in order according to the screw distance determined by the technology.
Welcome to visit: sales@hxjq.com.
sand washing equipment: Sand Washer,Sand Washing Machine,Screw Washing Machine,Sand Washing Equipment - HXJQ Machinery