http://pellet-machine.net

En-masse Conveyor/Elevator Introduction En-masse conveyor/elevator can be used for both horizontal and vertical conveying of most granular and small lump materials. This conveyor/elevator is ideal for handling many different materials for industries such as flour, rice, sugar and milk powder...

Screw Conveyor Introduction The screw conveyor is designed for horizontal or inclined conveying (dip angle<20°) of dry bulk materials such as powder and pellet. Its conveying length can be as long as 40 meters. The screw conveyor construction consists of inlet and outlet sections, trough...

Automatic Packaging System Introduction The automatic packaging system is widely applicable to grain, animal feed, chemical and metallurgical industry. It is designed for packaging fluid pellets and powder products. This automatic packaging system features auto filling, auto weighing, auto bag...

Why Need A Dryer Moisture content of biomass material is a key factor affecting the final quality of pellet. Experience tells us that if moisture content of raw materials exceeds 16%, pellet quality will begin to suffer. So drying is a significant operation in pellet producing. There are two...

Pipe Dryer Introduction Pipe dryer, also known as flash dryer, is used for drying materials whose moisture content is higher than 16%. The wet biomass material like sawdust is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. The wet material is dried as it...

Biomass Briquette Machine Introduction The biomass briquette machine is mainly used in processing agricultural residue like straw, rice straw, peanut shell, corn cob into solid briquettes in advanced technology. Briquetting is closely related to pelleting except that lager size stick fuel over...

Charcoal Briquette Machine Introduction Charcoal briquette machine can press bamboo, wood, shells, straw (besides rice and wheat straw) and other waste into various shapes solid briquettes with center hole without adding any binders. After the raw material being crushed and dried, they will be...

Wood Crusher Introduction Wood crusher, also known as wood chipper, is specialized equipment for wood logs processing industry. This crusher equipment integrates the chipping and crushing process and is suitable for cutting 1-20 cm of branches, stems and fiber stem material like bamboo, straw...

Wood Hammer Mill Introduction Wood hammer mill is used to crush materials into smaller and uniformed pieces by the collision between the high-speed hammer and materials. It is more suitable for milling relatively soft raw material like tree branch, cotton stalk, corn stalk, wheat straw etc...

About Water Drop Hammer Mill Water drop hammer mill is ideal grinding equipment to process various grains such as corn, broomcorn, wheat, barley, bean and ground cakes.The water drop design achieves an unique air intake way to prevent circulation during the grinding process. This feed grinder...

Double-roll Crusher Introduction The double roller crusher is designed to break large-sized pellets into small ones as required by the customer. The length of the crushed pellet by the general toothed roller usually ranges between 0.6-1.5mm, by the fine toothed roller ranges between 1-2.5mm.The...

Diesel Feed Pellet Machine Introduction Pellet machine is frequently driven by diesel engine or electric motor.Diesel feed pellet mill is energy saving pellet machine for making feedstuff for animals such as feed for rabbits, fish, chicken, pigs, sheep, cattle, etc.A variety of raw materials...

About Ultra Fine Feed Hammer Mill SWFL series ultra fine feed hammer mill is a new grinding device which applies to all sizes of feed plants. It can grind all grain products such as corn, broomcorn, wheat, rice, etc. after sieving, iron removing and mixing stages. The ground products can be...