What should we notice in bean processing equipment operation:
View attachment 6528
1. Connect the 380V power supply before bean processing equipment operation, then start the motor, and check whether the revolving direction keeps unanimous with the indicating arrow. If they are not unanimous, we can exchange the two splices at will, then they will become unanimous with the indicating arrow.
2. The beans that will be peeled should not be too dry, if not, they will be easily broken. The moisture content should keep about 9%, or the broken rate will increase. In this case, we can damp the beans with water first. In winter, it needs about 4 hours for dampening and two hours in spring. Then the beans can be processed by the bean processing equipment. This is quite important in BEAN PROCESSING EQUIPMENT operation attentions.
3. Before processing, we should separate the beans by different species and granules. Then we use suitable size of screens, which can improve production efficiency and reduce broken rate.
4. After trial run of the bean processing equipment, if each part of the machine runs normally and without any noise, then we can begin the production. Bean Processing Equipment
View attachment 6528
1. Connect the 380V power supply before bean processing equipment operation, then start the motor, and check whether the revolving direction keeps unanimous with the indicating arrow. If they are not unanimous, we can exchange the two splices at will, then they will become unanimous with the indicating arrow.
2. The beans that will be peeled should not be too dry, if not, they will be easily broken. The moisture content should keep about 9%, or the broken rate will increase. In this case, we can damp the beans with water first. In winter, it needs about 4 hours for dampening and two hours in spring. Then the beans can be processed by the bean processing equipment. This is quite important in BEAN PROCESSING EQUIPMENT operation attentions.
3. Before processing, we should separate the beans by different species and granules. Then we use suitable size of screens, which can improve production efficiency and reduce broken rate.
4. After trial run of the bean processing equipment, if each part of the machine runs normally and without any noise, then we can begin the production. Bean Processing Equipment