The charcoal making machine is a machine that pulverizes into a pellet of 10 mm by a wood chip pulverizer, is dried by a dryer, and is put into a carbonization furnace for carbonization.


The charcoal production machine produces charcoal with high density, small volume and good flammability, which can replace fuelwood and coal.


This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. The complete set of charcoal making machine includes a rod making machine, a carbonization furnace, a dryer and other equipment.



The principle of the charcoal making machine is simple and easy to understand. It contains branches, straw, straw, peanut hulls, trunks, cotton stalks, tea husks, husks, weeds, leaves and other biomass fibers that can produce charcoal. The raw material is filled, crushed into powder within 10mm by a pulverizer, dried by a dryer to make the moisture content within 12%, and the rod machine is formed by high temperature and high pressure (without adding any additives). After being placed in a carbonization furnace for carbonization, it is a finished machine-made charcoal.


Alternatively, the material powder can be directly carbonized into a carbon powder using a continuous carbonization furnace.


For the production of charcoal, we all know that most of the raw materials are sawdust, branches and other wooden materials, and finally the wood raw materials become black charcoal through the process of crushing, drying, rod making and carbonization.


Many friends are curious about the process, especially the use of sawdust briquette machine, watching the dry raw materials instantly become a dense semi-finished salary bar, just thinking, is it added a certain additive inside. So, do you want to use additives for the production of charcoal?


Looking closely at the video of the production process of the charcoal making machine recorded by our factory, we will know that no additives have been added to the whole process. The reason why raw materials can be squeezed into salary bars is because these materials have a common feature, that is, they contain certain lignin, and these lignin soften and liquefy when they reach 200-300 degrees Celsius, as long as a certain pressure is applied. It is tightly bonded to cellulose and cemented with adjacent particles, and solidified after cooling.


The rod-making machine equipment produced by our factory uses the characteristics of lignin to extrude the raw materials containing lignin into the semi-finished products we need, and then put them into the carbonization furnace for carbonization to make the finished charcoal.


However, some customers have seen or heard that some equipment needs to add additives during the molding process. What I want to say is that it uses a toner molding machine instead of a rod maker, and its raw materials and processes are different. The carbon powder forming machine is formed by adding crushed charcoal and the like to an additive to realize recycling of the charcoal.