vertical milling machine, first grinding machine manufacturer to provide the best in Shenzhen of China vertical milling machines, click customer service for free to get the latest prices!
vertical milling machine used as follows:
1, vertical roller mill using process, designated officers in charge, the operator must possess a certain skill level. vertical roller mill operator prior to the installation must be carried out with the necessary technical training to make it understand the principle of vertical roller mill performance, familiar with the operation.
2, mill use after a period of time, repair should be carried out while grinding roll and ring blade maintenance replacement of wearing parts such as, roller device using the connecting bolts and nuts should be carefully checked before and after to see if loosening, lubricating oils and foot.
3, vertical roller mill normal equipment maintenance system for safe operation of equipment should be established in order to ensure the long-term safe operation of the mill, and necessary maintenance tools and grease and the corresponding accessories.
4, fine adjustment, according to size, hardness and water content of the material, the proportion is different, different thickness of processing, can adjust the top of the Analyzer, high speed, high fineness and low speed, low fineness. Improve the fineness, yield will be reduced accordingly, if it does not meet the requirements should be debugged when fan speed, users can be flexible.
5, roller devices use timing when over 500 hours replace roller, cleaning must be carried out on the sleeve of the rolling bearings, the damaged parts should be replaced immediately, filling tool can be used to manually add oil and grease guns.
6, grinding roll and ring of scrapping the limit, the remaining minimum wall thickness shall not be less than 10MM.
7, stop, stop feeding, the host continues to bar so that residual Abrasives continued grinding, about a minute later, shut down the host motor the motor and Analyzer, stop grinding work on subsequent stops the blower motor so that blowing the powder residue.
vertical milling machine used as follows:
1, vertical roller mill using process, designated officers in charge, the operator must possess a certain skill level. vertical roller mill operator prior to the installation must be carried out with the necessary technical training to make it understand the principle of vertical roller mill performance, familiar with the operation.
2, mill use after a period of time, repair should be carried out while grinding roll and ring blade maintenance replacement of wearing parts such as, roller device using the connecting bolts and nuts should be carefully checked before and after to see if loosening, lubricating oils and foot.
3, vertical roller mill normal equipment maintenance system for safe operation of equipment should be established in order to ensure the long-term safe operation of the mill, and necessary maintenance tools and grease and the corresponding accessories.
4, fine adjustment, according to size, hardness and water content of the material, the proportion is different, different thickness of processing, can adjust the top of the Analyzer, high speed, high fineness and low speed, low fineness. Improve the fineness, yield will be reduced accordingly, if it does not meet the requirements should be debugged when fan speed, users can be flexible.
5, roller devices use timing when over 500 hours replace roller, cleaning must be carried out on the sleeve of the rolling bearings, the damaged parts should be replaced immediately, filling tool can be used to manually add oil and grease guns.
6, grinding roll and ring of scrapping the limit, the remaining minimum wall thickness shall not be less than 10MM.
7, stop, stop feeding, the host continues to bar so that residual Abrasives continued grinding, about a minute later, shut down the host motor the motor and Analyzer, stop grinding work on subsequent stops the blower motor so that blowing the powder residue.