Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: i need A rice mill project Report Above RS 50 Lakh

  1. #1

    Join Date
    Apr 2011
    Posts
    1

    Post i need A rice mill project Report Above RS 50 Lakh

    can you help me to make a project Report Rs 50 Lakh investment for a rice mill including Building , machinery, electric trance former ... and purchase of row material .


    thanks

  2. #2

    Join Date
    Oct 2010
    Posts
    34

    Post Detail Project Report for Automatic Rice Milling Plant

    We have set up few Automatic Rice Milling units on turnkey basis. We suggest following relevant points to the readers:

    Rice Milling unit could be of two types: Parboiled and Raw. Raw Rice is derived from paddy by de-husking (removing husk) and polishing (removing bran). Parboiled Rice also involves de-husking and polishing however before this paddy is boiled and dried. Parboiling makes rice easier to process, improves its nutritional profile, and changes its texture. Parboiling rice drives nutrients, especially thiamine, from the bran into the grain, so that parboiled white rice is 80% nutritionally similar to brown rice.

    Capital investment is higher for manufacturing Parboiled Rice than to manufacture Raw Rice. Adequate working capital in hand is also the key to success of this venture. Paddy is available for few months in a year and you have to store adequate quantity of paddy for round the year milling.

    Variety of Paddy to be milled is also the issue. Milling Basmati Rice is more profitable venture than milling Non-Basmati Rice.

    Below I am informing capital investment needed. Land and Building requirement is more for parboiled rice. Space requirement is dependent upon capacity of rice mill too.

    Machinery for Parboiled Rice: Parboiling & Drying Unit, Paddy Cleaner, De-husker, Separator, Polisher or Whitener, Grader and Packing Machine. Production line includes elevators, conveying pipes, electric motors and control panel. Civil construction involves pit at paddy input, partitions for waste, husk, bran and rice. Also include steam generation & utilization unit and power generation unit.

    Machinery for Raw Rice: It is same as above excluding Parboiling & Drying Unit and Steam Generation & Utilization Unit.

    Capacity of Rice Mill could range from 1 ton paddy per hour to 30 ton paddy per hour.

    Working Capital: Adequate storage of paddy is the key to success of this venture.

    Our working methodology: We will have first round of discussion with entrepreneur and will understand his present status and expectation. We will prepare Detailed Project Report. It will serve as operational guideline to the entrepreneur. Further DPR will be submitted to subsidy and loan sanction authority. We take liaison work with concerned authorities and try our level best that desired Term Loan and Cash Credit facility is sanctioned as early as possible. We will be there while commissioning of plant and machineries. We can help entrepreneur for procurement of paddy. We have reliable source that can provide paddy throughout the year.

    I hope readers are aware of power generation potential with rice husk. State Electricity Board has attractive scheme of purchase for electricity generated through renewable means i.e. attractive rate per unit and long-term power purchase agreement. In fact SEB will issue one month revolving L/C in favor of entrepreneur. Hence no risk of delayed payment. Total capital investment required to generate 1 MW electricity could be in range Rs. 4 crore to Rs. 5 crore. To generate 1 MW electricity you need around 1.5 ton husk per hour. SEB will have agreement first then will give you sufficient time (18 months) to erect necessary equipments and transmission line to nearest grid station. Apart from assured monthly payment you can avail CDM benefit also.

    Last, but not the least, we can establish necessary tie up with malls and institutional buyers for your finished rice and bran selling.

    With regards
    Sameer Narayan

  3. #3

    Join Date
    Oct 2012
    Posts
    1

    Thumbs up Rice milling

    Thanks for the information. Need some clarification further. Paddy processed by PAR-BOILING method will have less rice bran content, essential for making rice bran oil?? what shd br The minimum capacity of mill to make profit?? can Rice milling, rice bran oil and power generation be set up together, if so what should be the minimum investment??

  4. #4

    Join Date
    Sep 2011
    Posts
    1

    Default

    Hi Sameer,

    Please provide your email address, as I'm planning to setup rice mill nearby hyderabad. FYR, you can contact me
    Last edited by moderator A; February 27th, 2013 at 04:17 PM. Reason: only premium members are allowed to post contact info. please click My Account to upgrade

  5. #5

    Join Date
    Apr 2013
    Posts
    2

    Default Sameer Narayan ji

    Quote Originally Posted by goushalabiz View Post
    We have set up few Automatic Rice Milling units on turnkey basis. We suggest following relevant points to the readers:

    Rice Milling unit could be of two types: Parboiled and Raw. Raw Rice is derived from paddy by de-husking (removing husk) and polishing (removing bran). Parboiled Rice also involves de-husking and polishing however before this paddy is boiled and dried. Parboiling makes rice easier to process, improves its nutritional profile, and changes its texture. Parboiling rice drives nutrients, especially thiamine, from the bran into the grain, so that parboiled white rice is 80% nutritionally similar to brown rice.

    Capital investment is higher for manufacturing Parboiled Rice than to manufacture Raw Rice. Adequate working capital in hand is also the key to success of this venture. Paddy is available for few months in a year and you have to store adequate quantity of paddy for round the year milling.

    Variety of Paddy to be milled is also the issue. Milling Basmati Rice is more profitable venture than milling Non-Basmati Rice.

    Below I am informing capital investment needed. Land and Building requirement is more for parboiled rice. Space requirement is dependent upon capacity of rice mill too.

    Machinery for Parboiled Rice: Parboiling & Drying Unit, Paddy Cleaner, De-husker, Separator, Polisher or Whitener, Grader and Packing Machine. Production line includes elevators, conveying pipes, electric motors and control panel. Civil construction involves pit at paddy input, partitions for waste, husk, bran and rice. Also include steam generation & utilization unit and power generation unit.

    Machinery for Raw Rice: It is same as above excluding Parboiling & Drying Unit and Steam Generation & Utilization Unit.

    Capacity of Rice Mill could range from 1 ton paddy per hour to 30 ton paddy per hour.

    Working Capital: Adequate storage of paddy is the key to success of this venture.

    Our working methodology: We will have first round of discussion with entrepreneur and will understand his present status and expectation. We will prepare Detailed Project Report. It will serve as operational guideline to the entrepreneur. Further DPR will be submitted to subsidy and loan sanction authority. We take liaison work with concerned authorities and try our level best that desired Term Loan and Cash Credit facility is sanctioned as early as possible. We will be there while commissioning of plant and machineries. We can help entrepreneur for procurement of paddy. We have reliable source that can provide paddy throughout the year.

    I hope readers are aware of power generation potential with rice husk. State Electricity Board has attractive scheme of purchase for electricity generated through renewable means i.e. attractive rate per unit and long-term power purchase agreement. In fact SEB will issue one month revolving L/C in favor of entrepreneur. Hence no risk of delayed payment. Total capital investment required to generate 1 MW electricity could be in range Rs. 4 crore to Rs. 5 crore. To generate 1 MW electricity you need around 1.5 ton husk per hour. SEB will have agreement first then will give you sufficient time (18 months) to erect necessary equipments and transmission line to nearest grid station. Apart from assured monthly payment you can avail CDM benefit also.

    Last, but not the least, we can establish necessary tie up with malls and institutional buyers for your finished rice and bran selling.

    With regards
    Sameer Narayan
    as i have boght a land one acre in in uttar pradesh , i m keen intrested in setting up rice mill and flour mill , as main production is rice and wheat here ,, can u gude me ,, my cell no is 9044410001, my email add omiji1@yahoo.com

    thank you

  6. #6

    Join Date
    May 2013
    Posts
    1

    Default

    Hi Sameer, hope ur doing good. By now you must have got good control over the business.

    I am planning to set up Rice mill in Bihar, wanted to get some idea from you. It will be nice if you can share your contact info.
    u can mail me at doks23atgmail.
    Thanks
    SD

  7. #7

    Join Date
    May 2011
    Posts
    1

    Default

    Dear Mr Sameer,

    We are professional rice milling equipmet trading company based in Kolkata.
    We have experience of more than 10 years for Rice mill Machinery.
    We also operate two Rice Mill for more than 15 years.

    Please send us a email at info@omkhadya.com or visit Rice Milling Machine, Rice Polisher Manufacturer & Supplier - Om International Traders for more details.

    Regards
    Santosh Gupta
    Om International Traders
    Kolkata, India

  8. #8

    Join Date
    Mar 2014
    Posts
    1

    Default set up rice mill in uttar pradesh

    Quote Originally Posted by goushalabiz View Post
    We have set up few Automatic Rice Milling units on turnkey basis. We suggest following relevant points to the readers:

    Rice Milling unit could be of two types: Parboiled and Raw. Raw Rice is derived from paddy by de-husking (removing husk) and polishing (removing bran). Parboiled Rice also involves de-husking and polishing however before this paddy is boiled and dried. Parboiling makes rice easier to process, improves its nutritional profile, and changes its texture. Parboiling rice drives nutrients, especially thiamine, from the bran into the grain, so that parboiled white rice is 80% nutritionally similar to brown rice.

    Capital investment is higher for manufacturing Parboiled Rice than to manufacture Raw Rice. Adequate working capital in hand is also the key to success of this venture. Paddy is available for few months in a year and you have to store adequate quantity of paddy for round the year milling.

    Variety of Paddy to be milled is also the issue. Milling Basmati Rice is more profitable venture than milling Non-Basmati Rice.

    Below I am informing capital investment needed. Land and Building requirement is more for parboiled rice. Space requirement is dependent upon capacity of rice mill too.

    Machinery for Parboiled Rice: Parboiling & Drying Unit, Paddy Cleaner, De-husker, Separator, Polisher or Whitener, Grader and Packing Machine. Production line includes elevators, conveying pipes, electric motors and control panel. Civil construction involves pit at paddy input, partitions for waste, husk, bran and rice. Also include steam generation & utilization unit and power generation unit.

    Machinery for Raw Rice: It is same as above excluding Parboiling & Drying Unit and Steam Generation & Utilization Unit.

    Capacity of Rice Mill could range from 1 ton paddy per hour to 30 ton paddy per hour.

    Working Capital: Adequate storage of paddy is the key to success of this venture.

    Our working methodology: We will have first round of discussion with entrepreneur and will understand his present status and expectation. We will prepare Detailed Project Report. It will serve as operational guideline to the entrepreneur. Further DPR will be submitted to subsidy and loan sanction authority. We take liaison work with concerned authorities and try our level best that desired Term Loan and Cash Credit facility is sanctioned as early as possible. We will be there while commissioning of plant and machineries. We can help entrepreneur for procurement of paddy. We have reliable source that can provide paddy throughout the year.

    I hope readers are aware of power generation potential with rice husk. State Electricity Board has attractive scheme of purchase for electricity generated through renewable means i.e. attractive rate per unit and long-term power purchase agreement. In fact SEB will issue one month revolving L/C in favor of entrepreneur. Hence no risk of delayed payment. Total capital investment required to generate 1 MW electricity could be in range Rs. 4 crore to Rs. 5 crore. To generate 1 MW electricity you need around 1.5 ton husk per hour. SEB will have agreement first then will give you sufficient time (18 months) to erect necessary equipments and transmission line to nearest grid station. Apart from assured monthly payment you can avail CDM benefit also.

    Last, but not the least, we can establish necessary tie up with malls and institutional buyers for your finished rice and bran selling.

    With regards
    Sameer Narayan
    hi Sameer I want to set up rice mill in uttar Pradesh ..can u guide me about the capital needed n other essentials for it

  9. #9

    Join Date
    Nov 2014
    Posts
    1

    Default

    Hi
    I want to setup rice mill project in dist. Vidisha madhyapradesh. Can u guide how much fund requared and require space and risk factor in this project
    Thanks
    Mahendra

  10. #10

    Join Date
    Feb 2015
    Posts
    1

    Default

    Hi Sameer,
    Can I get your contact details please. I need some more information on the cost, land, requirement etc. I want to setup a Rice Mill in Maharashtra.

    Regards, Shankar P Sarkar

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •