M POWER - Module for Mobi le Starters L&T New Product
- Thread starter antoambu
- Start date
Ms.Kirti/Ashwini,
Do you have any reply for this question.
Do you have any reply for this question.
mobitech_irriauto
Member
L&T module for mobile starter are able to fix only with LTLK control panels. It cannot be even fix with LTLK DOL starter.
It doesn't have inbuilt SPPR, so you can't fix for any other panel boards.
Also it have SMPS type power supply, it will damage when there is very low lightning.
It doesn't have inbuilt SPPR, so you can't fix for any other panel boards.
Also it have SMPS type power supply, it will damage when there is very low lightning.
hi dear,
six month before , I have installed L & T mobile starter for 1HP local brand motor and single phase. its working fine and L&T service is very good.
we can run the motor by three ways.
1.Missed call
2.SMS
3.Timer
And the cost of the product is very less than other mobile starter.
if you want more info,please contact cic@LNTEBG.com or 1800 233 5858.
Thanks,
Anto Ambrose.J
six month before , I have installed L & T mobile starter for 1HP local brand motor and single phase. its working fine and L&T service is very good.
we can run the motor by three ways.
1.Missed call
2.SMS
3.Timer
And the cost of the product is very less than other mobile starter.
if you want more info,please contact cic@LNTEBG.com or 1800 233 5858.
Thanks,
Anto Ambrose.J
hi dear,
six month before , I have installed L & T mobile starter for 1HP local brand motor and single phase. its working fine and L&T service is very good.
we can run the motor by three ways.
1.Missed call
2.SMS
3.Timer
And the cost of the product is very less than other mobile starter.
if you want more info,please contact cic@LNTEBG.com or 1800 233 5858.
Thanks,
Anto Ambrose.J
six month before , I have installed L & T mobile starter for 1HP local brand motor and single phase. its working fine and L&T service is very good.
we can run the motor by three ways.
1.Missed call
2.SMS
3.Timer
And the cost of the product is very less than other mobile starter.
if you want more info,please contact cic@LNTEBG.com or 1800 233 5858.
Thanks,
Anto Ambrose.J
mobitech_irriauto
Member
Dear Sir:
Please prove me that you are receiving intimation message if electricity fails in L&T M-Power GSM module.
Please prove me that you are receiving intimation message if electricity fails in L&T M-Power GSM module.
mobitech_irriauto
Member
Dear Antoambu:
The message what you provided is ok, but you wont come to know when electricity fails.
Say example you switched on pumpset @ 10.00am Electricity goes off @ 11.00am and electricity resumes @ 5.00pm
In this case M-power let you know only @ 5.00pm
but our mobile starter let you know @ 11.01am itself
Note: 1. M-power doesn't have battery back up to let you know electricity failure
2. M-power doesn't suit apart from L&T panel board(It doesn't have in-built single phase preventer)
The message what you provided is ok, but you wont come to know when electricity fails.
Say example you switched on pumpset @ 10.00am Electricity goes off @ 11.00am and electricity resumes @ 5.00pm
In this case M-power let you know only @ 5.00pm
but our mobile starter let you know @ 11.01am itself
Note: 1. M-power doesn't have battery back up to let you know electricity failure
2. M-power doesn't suit apart from L&T panel board(It doesn't have in-built single phase preventer)
mobitech_irriauto
Member
Dear Sir:
Case: Suitablity
Mobitech(Realtech): Suits for all type of button type starter
L&T: Suits only for L&T panel board
Case: In-built electricity management system
Mobitech: Have inbuilt single phase preventer, phase imbalance preventer and low voltage preventer
L&T: Doesn't have such in-built electricity management system
Case: Dry run preventer
Mobitech: It sense the real flow of water and switches off if pump runs out of water
L&T: Have no option
Case: Battery backup
Mobitech: It shows real time data to customer
L&T: Goes to switch off mode if electricity fails
Case: 2 to 3 phase converter
Mobitech: Supports two to three phase converter
L&T: Doesn't support two phase to three phase converter
Case: Suitable for three button starter
Mobitech: Suits
L&T: Doesn't suit
Case: External light controller
Mobitech: Farmer can switch ON farm house external light
L&T: Doesn't have such facility
These are some of the difference between mobitech wireless solution(Realtech) product and L&T product.
Please feel free to write us back
Case: Suitablity
Mobitech(Realtech): Suits for all type of button type starter
L&T: Suits only for L&T panel board
Case: In-built electricity management system
Mobitech: Have inbuilt single phase preventer, phase imbalance preventer and low voltage preventer
L&T: Doesn't have such in-built electricity management system
Case: Dry run preventer
Mobitech: It sense the real flow of water and switches off if pump runs out of water
L&T: Have no option
Case: Battery backup
Mobitech: It shows real time data to customer
L&T: Goes to switch off mode if electricity fails
Case: 2 to 3 phase converter
Mobitech: Supports two to three phase converter
L&T: Doesn't support two phase to three phase converter
Case: Suitable for three button starter
Mobitech: Suits
L&T: Doesn't suit
Case: External light controller
Mobitech: Farmer can switch ON farm house external light
L&T: Doesn't have such facility
These are some of the difference between mobitech wireless solution(Realtech) product and L&T product.
Please feel free to write us back
Smart System for motor remote control and protection
Here are a few points from my view:
SMS based remote monitoring & control systems suffer from a few major disadvantages:
1. SMS is slow - Takes 10 to 15 seconds to get delivered. Also if there is a network coverage issue, only God knows when it will be delivered!
2. SMS is not guaranteed to deliver sequentially - Affects user experience in many different ways!!
eg: Consider the device sends an SMS message to user when motor is stopped (Message 1) and another SMS when motor is started (Message 2).
Now if Message 2 gets delivered to our phone first and Message 1 later, a typical user can be easily fooled. He will think that the motor is stopped while it is actually running, because thats the message from the device he got last - Leading to tremendous waste of energy and other unwanted problems!!
Even though the SMS sent by devices may contain time information, it will be hard for the user to distinguish.
While making these devices internet based is the permanent solution for this, farmers who are the majority customers for such products are still not so tech savvy.
So we need to stick on to SMS / missed calls!!
The Pumper series of products from Pottas Electronics is a smart GSM based motor control and protection system that overcome these problems.
- They have come up with an innovative solution for this by introducing SMS stamping technique in their products. This technology ensures that your phone process only the last sent SMS from the device. and the device process only the last sent SMS from your phone. The user will not be even aware that they get this advantage!! SMART!!
- Pumper offers motor protection from Dryrun, Over load, single phasing, phase reversal & voltage imbalances.
- If you have a smart phone, you can also use the smart Android application 'Pumper App' (available in play store) which features animated notifications for better motor status monitoring. You can see a white motor icon rotating on the notification bar while the motor is running, or a red icon when the system detects any motor faults.
- Pumper automatically detects smart phone and non-smart phone users. Non-smart phone users get motor status alerts in their SMS inbox, while smart phone users get all motor status as app notifications. Even the app need not be opened for this. COOL!
View attachment 12909
- Prepaid balance in device SIM card is also sent to users so that they can monitor balance amount available in device for SMS communication.
- Pumper offers motor operation via:
Android App
SMS
Phone Call
Missed Call &
Timer
More info about this product can be seen at Pottas Electronics | Pumper::Smart Cell Phone Motor Controller & Protector.
You can also view a product overview from https://www.youtube.com/watch?v=rnpUz_eX5to
Here are a few points from my view:
SMS based remote monitoring & control systems suffer from a few major disadvantages:
1. SMS is slow - Takes 10 to 15 seconds to get delivered. Also if there is a network coverage issue, only God knows when it will be delivered!
2. SMS is not guaranteed to deliver sequentially - Affects user experience in many different ways!!
eg: Consider the device sends an SMS message to user when motor is stopped (Message 1) and another SMS when motor is started (Message 2).
Now if Message 2 gets delivered to our phone first and Message 1 later, a typical user can be easily fooled. He will think that the motor is stopped while it is actually running, because thats the message from the device he got last - Leading to tremendous waste of energy and other unwanted problems!!
Even though the SMS sent by devices may contain time information, it will be hard for the user to distinguish.
While making these devices internet based is the permanent solution for this, farmers who are the majority customers for such products are still not so tech savvy.
So we need to stick on to SMS / missed calls!!
The Pumper series of products from Pottas Electronics is a smart GSM based motor control and protection system that overcome these problems.
- They have come up with an innovative solution for this by introducing SMS stamping technique in their products. This technology ensures that your phone process only the last sent SMS from the device. and the device process only the last sent SMS from your phone. The user will not be even aware that they get this advantage!! SMART!!
- Pumper offers motor protection from Dryrun, Over load, single phasing, phase reversal & voltage imbalances.
- If you have a smart phone, you can also use the smart Android application 'Pumper App' (available in play store) which features animated notifications for better motor status monitoring. You can see a white motor icon rotating on the notification bar while the motor is running, or a red icon when the system detects any motor faults.
- Pumper automatically detects smart phone and non-smart phone users. Non-smart phone users get motor status alerts in their SMS inbox, while smart phone users get all motor status as app notifications. Even the app need not be opened for this. COOL!
View attachment 12909
- Prepaid balance in device SIM card is also sent to users so that they can monitor balance amount available in device for SMS communication.
- Pumper offers motor operation via:
Android App
SMS
Phone Call
Missed Call &
Timer
More info about this product can be seen at Pottas Electronics | Pumper::Smart Cell Phone Motor Controller & Protector.
You can also view a product overview from https://www.youtube.com/watch?v=rnpUz_eX5to